INSTALLING YOUR RETRACTABLE WELD SCREEN
Parts
| Part | Quantity |
|---|---|
| Mounting Bracket | 4 |
| Aluminum Backing | 1 |
| Black Hex Rod Bracket | 2 |
| Roller Tube | 1 |
| Fiberglass Stay Bar | 4+/- |
| End Cap | 2 |
| End Bar | 1 |
| Curtain Blade | 1 |
| J-Hooks | 2 |
| Post | 1 |
| Base (Mobile or Fixed) | 1 |
| Hex Bolt | 1 |
| Nylon Insert Locknut | 1 |
| Spring Assembly | 1 |
| Socket Hex Head | 9 |
| Flat Washer | 1 |
| Button Hex Head Cap | 4 |
| M8 Washer | 2 |
Mounting the Retractable Weld Screen
WALL/BEAM
Lift, plumb and clamp unit in place
Pull curtain across to other side for mounting
Secure J-Hooks with proper fasteners
FIXED POST
Mark and drill concrete floor per hole pattern of support post bottom plate using minimum 3/8” x 2” concrete anchors
With the post on the ground, secure the screen to the post using Tek Screws
Mount top of the bracket to the top of the post
Turn upright
Secure into bottom fixed base and secure with bottom bolt
Pull curtain closed and locate where J-Hooks should be placed
Secure J-Hooks with proper fasteners
MOBILE BASE
Fasten casters to the base with provided self-tapping screws
Fasten the unit 8’ post
Turn post upright and insert the 8’ post into the base
Fill the bases with concrete
Pull curtain closed and locate where J-Hooks should be placed
Secure J-Hooks with proper fasteners
Mounting Options
Overhead view
Wall Mount to Post
Corner with 2 Wall Mounts to 1 Post
4 Posts to Posts
2 Wall Mounts to 2 Post
Replacing the Curtain
| Steps |
|---|
| 1. Remove fasteners from the grommets on the end bar |
| 2. Remove the end caps and pull the end bar out while holding tension on the unit |
| 3. Slowly let the roller tub unwind |
| 4. Remove one of the roller brackets |
| 5. Remove one of the roller brackets |
| 6. Attach new curtain blade to the roller tube |
| 7. Depending on curtain blade height and extension, put 12 – 15 revolutions on tube |
| 8. Attach curtain to roller and attempt to roll up with a light tug |
| 9. Once tension is acceptable, insert the end bar and fasteners into the grommet holes |
Troubleshooting
- 1
Curtain pulls too hard: Too much tension on roller, remove tension
- 2
Curtain pulls too easy: Not enough tension on roller, add tension
Tips & Tricks
For more tips on how to correctly install your ROLLTect Retractable Weld Screen, click here